| Random files - bwilson's Gallery |
Sheet metal cutouts not including skins.775 views
|
|
Items purchased from Aircraft Spruce, Wicks, and ATS.864 views
|
|
1/4" Pilot holes drilled for center section & wing spar attach locations setting dihedral.1028 views
|
|
Sheetmetal cutouts not including skins.752 views
|
|
Sanding Wing Spar Cap879 views
|
|
Drilling 1/2" hole in wing attachment after pilot hole drilled for dihedral.1016 views
|
|
Cutting Wing Spar cap898 views
|
|
Wing Spars1035 viewsWing Spars ready to rivet then set dihedral.
|
|
| Last additions - bwilson's Gallery |
Sun 'n Fun 20071105 viewsMay 14, 2007
|
|
Latest Style Wing Spars bolted to Center Section, Dihedral Set1059 viewsApr 08, 2007
|
|
Bucking Bar922 viewsThe Bucking Bar, 2" X 2" X 6" made out of 1018 bar with both ends milled, resting on a milled plate when riveting, forms nice shop heads on the AN470-4 rivets using a 3X rivet gun set at about 45PSI on the wing spars.Feb 27, 2007
|
|
Olfa P-Cutter 800973 viewsI can score several cuts, then bend/break up to .040 6061T6 sheetmetal and make nice cut lines on thicker materials to follow with a saw.Feb 24, 2007
|
|
Drilling 1/2" hole in wing attachment after pilot hole drilled for dihedral.1016 viewsFeb 22, 2007
|
|
1/4" Pilot holes drilled for center section & wing spar attach locations setting dihedral.1028 viewsFeb 20, 2007
|
|
LH Wing Spar1019 viewsFront of LH wing spar befor riveting.Feb 09, 2007
|
|
Wing Spars1035 viewsWing Spars ready to rivet then set dihedral.Feb 09, 2007
|
|
